Caliber Cerritos Spray Foam InsulationCaliber Cerritos Spray Foam Insulation(562) 307-9067

Closed-cell foam insulation in Cerritos CA - foam placed where it earns its cost

Cold floors over a damp crawl space or a drafty room over the garage? We seal and insulate it with one dense, solid layer.

Worker in protective suit sprays foam insulation across an attic floor beneath exposed wooden rafters.

When is closed-cell spray foam the right call for a Cerritos house?

Closed-cell foam insulation is a dense spray foam that sets hard, slows heat at about R-6 per inch, which is high for insulation, and lets almost no moisture vapor through at its usual thickness, so in Cerritos I put it where those traits are worth the extra cost.

Most calls about closed-cell foam start with a spot that keeps acting up: cold floors over a damp crawl space, a room over the garage that's hot by noon, or a wall that sweats. Foam can fix those, but it isn't the cheapest way to insulate, so I'd rather show you where it pays and where something simpler does the job. In California, installing insulation falls under the state licensing board's C-2 insulation class, which is worth checking for anyone you hire, and we're fully licensed and insured.

The price moves with how many square feet we cover, how thick the foam goes, how hard the space is to reach and whether leaks, damp wood or old insulation have to be dealt with first. The schedule turns on the city's sign-off and on how long the foam maker says to stay out after spraying, and your written estimate shows where your house lands on both.

  • We spray it on rim joists, crawl space walls, garage walls and other spots where damp gets in.
  • It seals air once it's at least 1.5 inches thick, where open-cell foam needs at least 5.5 inches.
  • Leaks, damp wood or a furnace that isn't venting right get fixed first, because foam would hide them.

What happens after you call us about closed-cell foam?

I do the visit and write the estimate myself, and our installers do the spraying. Here's how a closed-cell foam job usually runs, from your first call to the walk-through at the end.

  1. Call or send us a message

    Call (562) 307-9067 or use the form on this page, and we'll get back to you to set up a visit. Have a list of the areas you want insulated and a rough square footage handy.

  2. I visit, measure and photograph

    I go through the attic, walls or crawl space myself, measure and take photos, so the numbers match the house you actually have. You get a written estimate that lists each step in order, including any fixes that need to come before the foam.

  3. Our installers spray the foam

    On the day, our installers set up, protect the house, spray and clean up while everyone, pets included, is away. Plan your time out of the house around the foam maker's return time, which the questions below cover.

  4. We walk the finished job

    I check the work and go over it with you, edges, corners and cleanup included, before we call it done. Satisfaction guaranteed.

How we install closed-cell foam insulation

I start by deciding where closed-cell belongs, because it costs more to fill the same space, so it goes where damp is a problem or a stiff, solid layer matters, like a crawl space, rim joists or a garage wall. Our installers spray to the thickness on your estimate and keep the edges as full as the middle, since thin edges are where foam jobs usually come up short. Because the foam holds back moisture vapor, a frame wall filled with it can't dry well to the outside, so on walls we talk through how moisture will get out before we spray. In wood-frame walls it also makes the wall a good deal stiffer side to side, which counts for something in earthquake country.

When a space is big and stays dry, like the underside of an attic roof, open-cell foam insulation fills it with less material and costs less to install. Property managers get the same approach with commercial insulation, starting with a look at where damp and air get into the building.

  • Crawl spaces and rim joists

    This suits houses with cold floors or a musty smell from below, because closed-cell stands up to damp. It also seals the gaps where the floor framing sits on the foundation.

  • Garage walls and rooms above them

    Closed-cell works well in garage walls and the rooms over them, where a thin, stiff layer has to do a lot. We settle how the wall will dry before any foam goes in.

  • Attics with ductwork in them

    If your ducts run through the attic, foam under the roof can bring them inside the sealed space. Without ducts up there, sealing the gaps and topping up blown-in insulation, loose fill blown through a hose, usually does more for the money.

Get a written closed-cell foam estimate for your house

We reply within one business day, and I come out for a free on-site estimate with no obligation. After you send the form, we call to set the visit, and you get a written estimate listing each step in order.

(562) 307-9067

Questions about closed-cell foam in Cerritos homes

These are the questions Cerritos homeowners ask most about closed-cell foam, from the price to when the kids and pets can come home. If yours isn't here, call and ask.

How much does spray foam insulation cost in the Los Angeles area?

Spray foam insulation around Los Angeles usually costs about $2 to $5 per square foot, and that's the going range in the area, not a quote from us. Where your job lands depends on the area, the thickness, how easy the space is to reach and any fixes that come first, and your free estimate spells that out.

What is the best way to choose between closed-cell and open-cell foam?

Pick closed-cell where you need a rigid layer that holds back moisture, and open-cell where you just need to fill a large, dry space. Closed-cell costs more to install mainly because it expands less and takes more material to fill the same space, so that price gap is part of the choice.

How long do we have to stay out of the house after spray foam is installed?

Some foam makers recommend staying out 24 hours after professional spray foam goes on, but the time varies by product. Everyone, other trades included, should be out while it's sprayed, so ask for the maker's or supplier's ventilation and return time for your foam and plan around that.

Does insulation installed in California have to be certified?

Yes, state law requires all insulation sold and installed in California to be certified as meeting the state's insulation quality standards. That covers spray foam too, so it's fair to ask any installer what product they're putting in your house.

What causes new insulation to stop working in a Cerritos house?

Usually it's what was under or around it, not the new material. Fresh insulation over old stuff that was soaked or full of droppings, gaps left open around can lights, pipes and the hatch, and eave vents buried so the attic can't breathe are the common ones.

Is closed-cell foam a good idea for walls in an older house?

It can be, as long as you know how the wall will handle moisture once the foam is in. That's the conversation I'd have with you at the estimate, before anything gets sprayed.

Closed-cell foam insulation in Cerritos and nearby cities

Cerritos requires Planning Division approval before any home improvement starts, and Building & Safety issues the permits, so I check with the city before we set a date and we handle any permit and inspection. We do the same in Norwalk and Lakewood.

(562) 307-9067Get an estimate