Caliber Cerritos Spray Foam InsulationCaliber Cerritos Spray Foam Insulation(562) 307-9067

Wall insulation in Cerritos CA - walls filled full so rooms hold their temperature

Rooms that feel drafty or run hot in summer usually have thin or empty walls. We fill them full so the house holds its temperature.

An unfinished room has spray foam on one wall and ceiling, with fiberglass batts between studs on the far wall.

Can you insulate the walls in a house that's already built?

Wall insulation in Cerritos puts insulating material into the spaces between the studs inside your walls, so your rooms hold their heat or cool longer and less outside noise gets through. In a finished house it usually goes in through small holes, not open walls.

Most calls start with a room that won't stay comfortable. It might be a bedroom on an outside wall that's cold in the morning, or the room over the garage that bakes in August even though the attic above it has plenty. When the attic insulation is already right, the walls are usually what's left.

The price turns mostly on how many square feet of wall we're filling, whether the walls are finished or open, and how many cavities are closed off by built-ins and need their own holes. The schedule turns on the city's approvals and on clearing furniture away from the walls we're working on, and your written estimate lays out each step in order for your house. We're based in Cerritos and work in many cities around it in Los Angeles and Orange counties, so if yours isn't listed, just ask.

  • Finished walls get filled through small holes, so the drywall or stucco stays where it is.
  • Outside walls help with comfort, and inside walls help when you want a quieter bedroom.
  • We drill from inside or outside, whichever means less patching on your particular walls.

What happens after you call about your walls?

I'm the one who comes out and writes the estimate, and our installers do the work. Here's how a wall job runs from your first call to the walkthrough at the end.

  1. Call or send a message

    Call (562) 307-9067 or use the form, and we'll set a time for me to come out. A rough idea of the wall area in square feet, plus any built-in shelves or cabinets, helps me plan the visit.

  2. I measure and write it up

    I come out myself, measure the walls and take photos, so the numbers on your estimate match the house you actually have. You get it in writing, with each step listed in the order we'd do it.

  3. We fill and patch the walls

    On the day, our installers protect the floors and furniture near the work, fill each cavity and patch the holes. Cerritos allows construction from 7 a.m. to 6 p.m. on weekdays and 10 a.m. to 5 p.m. on Saturdays, with none on Sundays or city holidays unless the city approves other hours in writing, so we book your job inside those hours.

  4. I check the work with you

    Before we call it done, I go over the walls with you room by room and look at the patches and the fill. If anything looks off to you, that's the time to point it out.

How we do wall insulation

Before anyone drills, I find out what's inside each cavity, because a built-in bookcase or cabinet can close off a space that needs its own hole, a weak spot in an inside wall usually needs bracing or a gentler fill, and any cavity that carries air for heating or cooling has to stay empty. Then our installers blow loose fill through small holes and pack each cavity full, dense enough that it won't settle and leave voids at the top, and at that density it also slows air moving through the wall. When every cavity is full, we patch the holes.

A full wall only covers the stud bays, so leaks where the floor framing sits on the foundation, between floors and at the roof line stay just as they were, and closing those is the job of our air sealing services. If I see a leak or damp wood that should be fixed first, I'll put it on the estimate instead of insulating over it. Walls that sit below ground are a separate job, covered under basement insulation.

  • Blown-in through small holes

    This suits finished walls and odd-shaped or enclosed cavities, because loose fill flows around blocking and into corners a batt can't reach. It's how we fill most existing walls, since the drywall stays up.

  • Batts in open walls

    Rolled batts suit a remodel or an addition where the studs are open and evenly spaced, because they can be very cost effective in uniform cavities. They lose that edge once the spacing gets irregular or the wall is closed.

Get a written estimate for insulating your walls

We reply within one business day to set up a free visit at your home, and there's no obligation. After you send the form, I come out, measure your walls and give you the estimate in writing, step by step.

(562) 307-9067

Questions about insulating walls in Cerritos

Here are questions we hear from homeowners before they insulate their walls. If yours isn't here, call and ask, and I'll give you a straight answer.

How much does wall insulation cost in the Los Angeles area?

Insulating walls in the Los Angeles area usually costs about $1 to $4 per square foot of wall. That's the going range in the market, not a quote, and your written estimate puts a number on the walls you actually have.

What is the best way to insulate existing walls?

For an older home with empty wall cavities in a temperate climate, drill and fill is a common way to do it, where small holes are drilled, insulation is blown in and the holes are sealed. The walls stay up, so you aren't paying to tear out and replace drywall.

Who can legally insulate walls in California?

In California, insulation work falls under the state licensing board's C-2 Insulation and Acoustical Contractor license, which covers installing any insulating material for temperature or sound control. Someone without a license can take a job only if it's up to $1,000, needs no permit and they employ no one on it, and that limit used to be $500. We're fully licensed and insured.

Do I need to check with the city before insulating walls in Cerritos?

It's worth checking first, because for projects not on its list, Cerritos asks owners to call the Department of Community Development at (562) 916-1201 for the city's requirements. We check with the city before we set a start date, and when your job needs a permit, we handle the paperwork and the inspection.

What R-value does California require for walls?

California's energy code manual gives R-15 as the minimum for above-ground 2x4 wood-framed walls and R-21 for walls framed with 2x6 or larger. R-value is how well insulation slows heat, and how those minimums apply to a wall that's already built is something I'll explain once I've seen yours.

How do I tell if my walls have insulation in them?

The sure way is to look inside a cavity, because a wall can look and feel fine and still be empty. Outside walls that feel cold in winter or warm in summer, and an older house, are the usual hints, and I check a few cavities at the estimate visit.

Wall insulation in Cerritos and the cities around it

Cerritos wants Planning approval before any home improvement starts and issues permits for changes to existing homes, so the city settles what your job needs. We fill the same finished walls in Norwalk and Lakewood.

(562) 307-9067Get an estimate